News from the HPRA

7th August 2019

The HPRA are always striving to improve their processes and ways of working. The following updates in the Human Medicines Department should help us all in our dealings with each other.

New electronic workflow system

The human medicines department within the HPRA have transitioned to using a new (internal) electronic workflow system. Due to this the following changes are worth noting for MA (marketing authorisation) applications and the issuing of licences and summary of product characteristics (SmPCs) by the HPRA:

Product Specific Details (PSD)

The product specific information (which included the product composition and the manufacturers’ details) will no longer form part of the product licence document that is issued by the HPRA.
Previously the product licence document consisted of the licence cover page, PSD and Summary of Product Characteristics (SmPC). In future, the product licence document will consist of the licence cover page and the SmPC only. The information previously detailed in the PSD will be logged on the HPRA database and remain a registered part of the product marketing authorisation.

Summary of Product Characteristics (SmPC)

Updated SmPCs and Package Leaflets will publish on the website 24 hours after case closure.
(For details relating to the font/format of SmPC documents, further details are found in HPRA newsletter number 62).

PA numbers

PA, or Product Authorisation numbers, are the Irish version of the MA number. Newly allocated PA numbers for new holders will now contain 5 digit prefix.

Case Reference Number (CRN)

Previously CRNs were displayed as seven digits. These will now be alpha numerical for any new cases e.g. CRN00011X. The HPRA will still be able to identify any closed or ongoing cases using the old CRN.

Digital communications

All cases on the new system will be assigned a dedicated e-mail address e.g. [CaseNumber]@case.hpra.ie. This will enable you to send the HPRA case specific communications directly to the case and the allocated team. E-mail correspondence sent to you from the HPRA that is relevant to the case will come from this dedicated e-mail address. The European e-mail boxes will still be used where applicable. You should consult with your IT department to ensure that e-mails of this nature are not blocked in your organisation.

National Scientific Advice Guide

The HPRA have recently updated their National Scientific Advice Guidance (which commenced in 2017) to include additional therapeutic areas for stakeholders. These areas include: anti-infective products, vaccines, disorders of haemostasis and thrombosis, cardiovascular diseases, common allergic conditions, advanced therapies in certain clinical indications and biostatistics. The updated guidance can be found at the following link:

(Guide for national scientific advice)

Written by:

Claire Brown

Brexit – extension, extension, extension

19th June 2019

Brexit extension date is now 31 October 2019, but there’s not time to be complacent.

Are you planning to submit a Marketing Authorisation Application (MAA) for a Non-Prescription Medicine?

If you are preparing an MAA for a Non-Prescription Medicine for a Decentralised (DCP) or Mutual Recognition Procedure (MRP) you will need to prepare a ‘Justification for Non-Prescription Classification’ document in accordance to CMDh best practice guide issued in January 2019 (CMDh/250/2012, Rev 1).

https://www.hma.eu/fileadmin/dateien/Human_Medicines/CMD_h_/procedural_guidance/Application_for_MA/CMDh_250_2012_Rev.1_2019_01_clean_-_BPG_for_NPM_in_DCP_MRP.pdf

Ideally this document should be submitted as part of the initial MAA. Otherwise, you will be requested to provide it at the validation stage.

This document should be titled, “Justification for Non-Prescription Classification” and should be provided in Module 1.2. It should contain all the supporting data and evidence required to justify classification of the medicinal product as not subject to medical prescription as set out in the Guideline on Changing the Classification for the Supply of a Medicinal Product for Human Use [https://ec.europa.eu/health/sites/health/files/files/eudralex/vol-2/c/switchguide_160106_en.pdf].

If you need any clarification or advise to prepare a justification for Non-Prescription classification report to support a Marketing Authorisation Application, Ivowen will gladly assist you in a timely manner. Please contact us.

Related news in relation to Brexit

The current Brexit extension date is 31 October 2019. The UK remains an EU Member State for the duration of the extension, with all the rights and obligations set out in the treaties and under EU law.

Nevertheless, all pharmaceutical companies in the EU are reminded to continue their preparedness for the UK’s withdrawal.

Based on the European Council decision, the deadline of 29 March 2019 referred to in Brexit related guidance should be understood as referring to 31 October 2019.

The MHRA have updated guidance on Exporting active substance manufactured in the UK in a no deal scenario on 03/06/2019.

https://www.gov.uk/government/publications/exporting-active-substance-manufacturer-in-the-uk-if-we-leave-the-eu-without-a-deal

A template for the Written Confirmation can be found on the European Commission website,

https://ec.europa.eu/health/sites/health/files/files/gmp/2013_01_28_template.pdf

In the event of a no deal EU exit, the UK will be recognised as a Third Country for the export of active substances for human use to the EEA.

In the event of a no deal scenario, the UK will continue to accept importation of active substances into the UK without a Written Confirmation from the same list of countries as currently (namely the European Economic Area (EEA) countries, USA, Japan, Brazil, Australia, Israel and Switzerland).

A Written Confirmation will then be required for each shipment of active substances manufactured in the UK that is exported to the EEA.

Please contact us if you need any clarification or support to supply Written Confirmation(s) for the orderly import of Active Substances, Ivowen will gladly assist you in a timely manner.

The MHRA have issued a guidance on the Handling of Active Substance Master Files and Certificates of Suitability in the event of no deal published 18 March 2019.

After Brexit, the UK will no longer participate in ASMF work-sharing procedures with EU Member States or have access to the EU Communication and Tracking System (CTS) assessment report repository. Any reference in the above guideline to the CTS ASMF assessment repository or to EU/ASMF/XXXXX reference numbers will not be applicable to UK national applications after the UK leaves the EU.

Certificates of Suitability (CEPs) are not affected by the UK leaving the EU as they are issued by the European Directorate for the Quality of Medicines and Healthcare (EDQM), which is a Directorate of the Council of Europe and a body that is independent of the EU. On leaving the EU, the UK will remain a member of the Council of Europe and a signatory to the Convention on the Elaboration of a European Pharmacopoeia.

Please contact us if you need any additional information or if you need any clarification or advise on ASMFs or CEPs, Ivowen will gladly assist you in a timely manner.

Written by Marian Winder

Are you Brexit ready?

18th October 2018

Brexit in:

[wpcdt-countdown id=”796″]

Test your knowledge, take our Brexit quiz here

What do you want to do next? Do you want to continue to market your product in the EU only, or are you interested in both the EU and UK markets? Read on to find out what you need to do for both scenarios.

If you would like to continue to market your product in the EU there are a few things that need to be finalised before Brexit on the 29^th March 2019:

Reference Member State (RMS transfer)

This should have been done yesterday(!) The time it takes depends on the requested RMS’s workload.

Since July 2018 the MHRA is no longer accepting new applications with UK as RMS. However there are some currently authorised products wherein the UK is still the RMS.

If you have products and the UK is currently the RMS then it is vital a RMS transfer is initiated immediately. If there is only one CMS then this CMS should become the RMS (submission required). If there is more than one CMS, the preferred CMS needs to be consulted and a request sent asking them to be RMS. It is the responsibility of the MAH to secure a new RMS. The timeline for such transfers are solely dependent on the workload of the requested RMS.

Marketing Authorisation Holder (MAH) transfer

Needs to be done immediately – the time it takes is dependent on where the application is submitted.

From the 29^th March 2019 the MAH for a product licensed in an EU Member State (MS) other than the UK must be based in the EU. Therefore if the MAH is currently based in the UK there needs to be a MAH transfer to one based in the EU.

If this involves purely an address change (i.e. the marketing authorisation holder remains the same legal entity but they have an address in the EU) then this is a simple type IAin (A.1).
If the new MAH is a different legal entity then the MAH transfer must follow the guidelines of the currently registered RMS and CMS, at the very least documents such as transfer agreement, proof of establishment, , power of attorney(s), Pharmacovigilance (PV) update, etc., should be in place before submission of the request.

Batch release

Needs to be done within the next 4-8 weeks unless a product is a biological / immunological product in which case submission needs to be immediate.

Products that only have batch release and quality control testing sites for finished product in the UK will have to change the batch release and testing sites for their EU products. For products that have other batch release and testing sites the MAH may choose to delete the UK site(s) or may choose to replace them. For finished products manufactured in the UK an importation site (in EEA) will need to be introduced. In many cases, a single site can perform manufacturing, testing, importation and/or batch release activities.

The timelimes will follow the type IA/IB or type II (biological / immunological product) categories depending on what change is applied for. Please see https://ec.europa.eu/health/sites/health/files/files/eudralex/vol-2/c_2013_2008/c_2013_2008_doc/c_2013_2804_en.doc

PV

Needs to be done asap and in association with any MAH transfers – usually a type IA or type IAin

The Qualified Person for Pharmacovigilance (QPPV) and Pharmacovigilance Site Master File (PSMF) must be based in the EU/EEA.

If you wish to continue to market the product in the UK in addition to the EU:

The MHRA have stated that after Brexit, all currently approved authorisations will be transferred into national procedures and will remain valid.

If an application is in-progress at the time of Brexit the application will need to be submitted to the MHRA again as a national application in the case of CP procedures and that for MR or DC procedures a transitional provision will be made. HOWEVER, this is contingent on a Brexit deal that allows for a transition period. This has not yet been agreed.

To ensure the product can remain on the market / licensed, the UK are proposing the following if there is a no-deal Brexit

a MAH should be established in the UK by the end of 2020. Until then, the MHRA will require a contact in the UK. A Change of Ownership will need to be submitted to MHRA to change from an EU MAH to a UK MAH for UK MAs
the Qualified Person for Pharmacovigilance (QPPV) should be established in the UK on day one, although those without a current UK presence will have until the end of 2020 at the latest to do so, but would nevertheless be required to make arrangements for providing the MHRA with access to the relevant safety data related to UK Marketing Authorisations (MAs) at any time. Companies may choose to have the EU QPPV take on responsibility for UK MAs until the UK QPPV can be established. A variation should be submitted to the MHRA to change QPPV. Exact details of this will be consulted upon
a Qualified Person (QP) for products manufactured in the UK or directly imported into the UK from outside a country on a designated country list (whitelist) must reside and operate in the UK. A QP for products manufactured in a country on a whitelist or manufactured in a third country and imported into the UK from a country on a whitelist can reside in a country on the whitelist.

(https://www.gov.uk/government/publications/how-medicines-medical-devices-and-clinical-trials-would-be-regulated-if-theres-no-brexit-deal/how-medicines-medical-devices-and-clinical-trials-would-be-regulated-if-theres-no-brexit-deal)

Do you need help with any of the above or any other regulatory issue?

Contact us! We’re here to help.

Written by Emily Fletcher

Emily Fletcher

CESP expands in Poland and Greece

5th April 2017

Latest news from Poland and Greece for CESP

From 3^rd April 2017 it will be possible to submit the following procedures via Common European Submission Portal (CESP) to Poland:

Initial Marketing Authorisation Applications (MAAs)
Variations
Renewals

The submissions may concern national and European procedures (MRP, DCP) both for human and veterinary medicinal products.

Also from 3^rd April 2017 the following submissions should be transmitted through CESP for Greece:

All submissions for Mutual Recognition/Decentralised Procedures (MRP/DCP)
national procedures relating to approvals, variations, renewals, PSURs, ASMFs etc., as well as any other documentation should be submitted using CESP.
Responses to deficiencies and any other additional information that can be requested from the EOF within the claims of assessment.

What does this mean for you?

To date in Poland, only submissions concerning initial MAAs were possible via CESP. There are still some national requirements in Poland, however. All documents that require an original signature can be either submitted

in electronic version with a valid electronic signature or
must be submitted in parallel to CESP in paper.
Documentation once submitted via CESP should be submitted via this channel throughout its whole lifecycle.

For submissions into Greece, additional CD/DVDs are no longer required. In addition, for each submission, a corresponding reference number will be automatically assigned and will be sent directly to the applicant.

Where can I find more information?

Full details are available on the Polish Ministry’s website (in Polish) here.

Full information is for Greece (in Greek) here.

We can help…

Ivowen are fully equipped to prepare and submit any applications on your behalf. Please contact us or our EuDRAcon partners for more information and for support of your dossier compilation or updates.

Written by Majella Ryan

News from the HPRA

New electronic workflow system

Product Specific Details (PSD)

Summary of Product Characteristics (SmPC)

PA numbers

Case Reference Number (CRN)

Digital communications